Product Category: Other Pictures

Running Set Overview

This two-piece running set pairs a short-sleeve mesh tee in bright turquoise with running shorts in deep magenta, built as one coordinated outfit for training, race days and club programmes. The tee uses raglan sleeves so the shoulder moves freely without a seam sitting on top of the joint, and every seam on both pieces is finished with flatlock stitching in neon lime, a contrast thread that is functional first – flat seams do not chafe on long runs – and gives the set its sharp, technical look second.

As a running set manufacturer in Bangladesh, SIATEX produces coordinated activewear sets like this one for sports brands, event organisers and retail chains that need the top and bottom to arrive matched in colour, sizing and packaging. The set is sold as a unit but graded as two garments, so the tee fit and the shorts fit are each developed properly rather than one being an afterthought, and both pieces carry the same dye-lot discipline so the colours stay true across a full production run.

Tee Design Details

The tee is cut from open athletic mesh with a round crew neckline bound in self fabric, short raglan sleeves and a straight hem that sits at the hip. The neon lime flatlock runs along the raglan lines, down the side seams and around the hem and sleeve openings, mapping the construction of the garment in contrast thread. The chest is kept clean and free of branding on this sample, ready for a club crest, sponsor print or event logo exactly where your artwork places it.

The back view shows the same raglan construction continuing across the shoulders, with the mesh running uninterrupted for maximum airflow where the body heats up most. A small reflective transfer can be added at the back yoke or hem for low-light visibility on request, a detail many running clubs and night-event organisers ask for, and the neckline can be changed to a V-neck or a shallow scoop on a custom pattern.

Shorts Design Details

The shorts are a classic runner’s cut in magenta woven polyester: short leg, curved hem with side vents for stride length, and contrast neon binding tracing the hem and side stripe to match the stitching on the tee. The waistband is a wide black elastic that sits flat and holds through a run without a drawcord digging in, and an internal drawcord can be added where your market prefers one.

At the back, a zip pocket sits on the yoke with a neon green puller – sized for a key, card or energy gel and positioned so it does not bounce against the body. The pocket is one of the details buyers ask about most on running shorts, because it is the feature the end runner photographs and reviews. An inner brief liner in mesh can be built in or left out to your specification, and the leg length can be adjusted from race-short to a longer training cut.

Fabric and Mesh Construction

The tee fabric is a lightweight polyester athletic mesh: an open knit structure that lets air pass through the garment itself, moves sweat off the skin and dries fast between sessions. Polyester holds the turquoise colour through repeated washing without the fading cotton shows, and the mesh is knitted with enough density to stay opaque across the body while the open structure does the ventilating. Buyers can raise or lower the mesh openness and the fabric weight to suit a summer race series or a cooler-climate training range.

The shorts use a light woven polyester with a smooth face that does not cling when wet and a mechanical give in the weave that follows the stride without elastane. Flatlock seams on the tee are stitched with the contrast neon thread as standard on this design; the same construction can be run in self-colour thread for a quieter retail look. Every fabric is checked for colour fastness, shrinkage and seam strength before bulk cutting, and a lab-dip and strike-off stage approves colour and print before production begins.

Fit, Sizing and Grading

The set is graded as a women’s running fit: the tee follows the body without compression, with room through the chest and a hem that stays in place over the shorts waistband, and the shorts sit at the natural waist with a leg opening wide enough for a full stride. Sizes run from XS to 3XL, graded as a matched set so a size medium tee and a size medium shorts are developed against the same body measurements, and mixed-size set packing is available for retail programmes that sell the two pieces under one barcode.

Fit samples are made first in your base size and measured against your size chart before grading, and the set can equally be developed in a men’s or unisex block, or as separates, where a programme needs the tee for one event and the shorts for another. Tall and petite length options on the shorts are a simple pattern adjustment at development stage.

Colours, Print and Branding Options

Turquoise with magenta is the colourway shown; the set can be produced in your team’s or retailer’s colours, with the flatlock stitching and binding kept in neon contrast or matched to the body. Colour blocking between the tee, the shorts, the waistband and the binding gives a wide design space from one pattern – a club can run its home and away colourways from the same blocks with only the dye and thread cards changed.

Branding routes include chest prints by screen print or heat transfer, embroidered crests, reflective logos for night visibility, woven hem labels and printed size markings inside the neck. Because the tee chest is blank on this design, artwork placement is entirely yours; our sampling team produces a printed strike-off for approval so position, size and colour are locked before bulk.

Production and Quality Control

Production runs in Bangladesh through a controlled sequence: fabric inspection on arrival, marker making and cutting, flatlock and overlock sewing lines for the tee, separate woven lines for the shorts, then pocket zips, binding and waistband attachment before the two pieces are matched into sets. Inline checks run at each stage, with seam strength, stitch density and measurement checks on a sampling basis through the run, and a final audit on finished sets before packing – both pieces together, so a set never ships with mismatched sizes or shades.

Shade matching between the mesh tee and the woven shorts deserves its own note: two different fabric types take dye differently, so the lab works both to the same colour standard under daylight and store lighting checks, and set matching is verified again at packing. Needle detection, button and zip pull tests, and carton-level checks complete the export routine.

Minimum Order and Lead Times

Minimums are set per style and colourway rather than as one blanket figure – as a guide, a two-piece set programme in a single colourway starts at a few hundred sets, with the exact minimum confirmed against your fabric choice and size ratio at quotation stage. Mixed colourways inside one order are possible where total quantities support the dye lots, which suits event programmes that need several club colours at once.

Sampling normally takes one to two weeks from artwork and fabric confirmation, and bulk production follows the fabric booking: mesh and woven fabrics are sourced at order stage because no stock is held, so lead times are quoted honestly per order with the fabric timeline shown separately from the sewing timeline. Repeat orders on approved blocks run faster, as patterns, markers and colour standards are already on file.

Global Markets We Supply

Running participation keeps growing across Europe and North America, and with it the demand for coordinated sets that look like a team kit rather than two unrelated garments. This set ships to running clubs and event companies around Vienna, Dublin, Lisbon and Helsinki, to sports retailers in Stockholm, Rome and Cardiff, and to race organisers whose participant tees and shorts need to match across thousands of finishers.

In North America the set suits marathon and fun-run programmes in San Francisco, Portland, Charlotte and Minneapolis, plus Canadian club orders around Ottawa and Edmonton where the sales office in Toronto supports communication in the buyer’s time zone. Australian demand comes from Brisbane and Adelaide running communities that train through warm evenings and need the mesh weight kept light, while Hong Kong buyers use the set for corporate wellness runs; production stays in Bangladesh and ships worldwide under one export programme, with sizes, labelling and test standards adjusted to each market’s rules.

Packaging and Export

Sets are folded together and packed as one unit, tee and shorts size-matched, in a single polybag with your barcode and care labels, or packed as separates where a retailer sells the pieces individually. Retail programmes can specify hangers, header cards and printed event packaging; club programmes usually take simple branded bags with size sorting by team list. Cartons are marked by colourway and size ratio for warehouse intake.

Export runs from Bangladesh with full documentation, and orders are handled on an inquiry basis: send your colours, quantities and artwork through the inquiry system and the merchandising team replies with pricing, sampling steps and a production timeline for your programme.